1 1

Cabin Denmark

Steplight 1306 Stainless Steel

Steplight 1306 Stainless Steel

1306WH

€319,90 EUR
€319,90 EUR
Sale Sold out
Tax included. Shipping calculated at checkout.
LED Light Color

A recessed LED steplight with a polished stainless steel front for dry interior, accommodation and staircase areas on board. It gives 500 lm of warm white 2700 K light with CRI above 85 in a 100° beam, drawing only 2.5 W on 24 V DC. It fits a 77 × 70 mm cut-out and is held by two springs, without tools.

  • 500 lmLight output
  • 2.5 WPower consumption
  • 2700 KWarm white, CRI >85
  • 100°Beam angle
  • 24 V DC 24 V systems
  • IP20Interior and covered areas
  • 90 × 90 × 55 mmRecessed
  • 0.15 mCable

Where to use it
  • Staircases
  • Steps
  • Hallways
  • Accommodation areas

Orientation and courtesy lighting for steps, staircases and passageways in dry interior and accommodation areas. The 100° beam spreads 500 lm evenly over the area in front of the light, and CRI above 85 shows steps and floor surfaces in natural colours. The White Light version gives warm white light at 2700 K. The Red & White Light version allows night-vision-friendly operation after dark.

Specifications

Light

Light output500 lm
Colour temperature2700 K warm white
Light coloursWhite, Red & White
Colour renderingCRI >85
Beam angle100°

Electrical

Supply voltage24 V DC
Power consumption2.5 W
Current at 24 Vapprox. 0.1 A
Cable length150 mm

Mechanical

Dimensions (L × W × H)90 × 90 × 55 mm
MountingRecessed
Fixing2 springs, tool-free
MaterialAluminium, Polished stainless steel front
Ingress protectionIP20

Installation and dimensions

Cut a 77 × 70 mm opening and press the light into place: two springs hold it securely, without tools. The housing measures 90 × 90 × 55 mm, with a polished stainless steel front on an aluminium body.

Connect the light to the 24 V DC supply with the 150 mm connection cable and its Wieland connector. The LED is integrated.

Versions and order numbers
Order no.Version
1306WHWhite Light
1306REWHRed & White Light

White Light gives warm white 2700 K and Red & White Light allows night-vision-friendly operation. Specify version when ordering.

Frequently asked questions

What cut-out does the Steplight 1306 need?
A 77 × 70 mm cut-out. Two springs hold the light in place, no tools needed. Overall dimensions are 90 × 90 × 55 mm.

Which supply voltage does it need?
The Steplight 1306 runs on 24 V DC. It is available as one version for 24 V systems.

Where on board can it be installed?
It is designed for dry interior, accommodation and staircase areas. The light is rated IP20.

Which light colours are available?
White Light in warm white 2700 K, and Red & White Light for night-vision-friendly operation. Please specify the version when ordering.

How much power does it use?
2.5 W for 500 lm, about 0.1 A at 24 V. That keeps the load on the on-board supply low.

How is it connected?
With the 150 mm connection cable and its Wieland connector to the 24 V DC supply.

Can the light source be replaced?

No. The LED is permanently built into the light and cannot be replaced.

Downloads

View full details