Cabin Denmark
Courtesy Light 1009 MOD.3 Titan Aluminium
Courtesy Light 1009 MOD.3 Titan Aluminium
SKU:1009 MOD.3 12V
Couldn't load pickup availability
A compact surface-mounted LED courtesy light in silver hard-anodised Titan Aluminium for cabins, cockpits and decks. It combines white, red and orange in one fixture: orange results from switching white and red on at the same time. Only 0.2 W, IP65, CRI above 90 and 82 × 20 × 6 mm, available as 12 V or 24 V version.
- 0.2 WPower consumption
- IP65Interior and exterior
- Titan AluminiumMaterial
Where to use it
Where to use it
- Cabins
- Cockpit
- Deck
- Steps
Courtesy and orientation lighting for cabins, cockpits and decks, with three light colours in one fixture. White gives clear visibility in port, shows contours and adds safety when docking. Red supports orientation at night, preserves night vision and minimises glare. Orange gives a warm, calm light for quiet hours on board. With IP65 the light suits interior and exterior positions, and at 0.2 W it is well suited to long operating hours on the onboard battery.
Specifications
Specifications
Light
| Colour rendering | CRI >90 |
|---|
Electrical
| Power consumption | 0.2 W |
|---|
Mechanical
| Material | Titan Aluminium |
|---|---|
| Ingress protection | IP65 |
Installation and dimensions
Installation and dimensions
Surface-mounted on smooth surfaces, so no cutout is needed. The housing measures only 82 × 20 × 6 mm.
Choose the 12 V version (10–16 V DC) or the 24 V version (20–30 V DC) to match the onboard supply. The LED driver is integrated and provides constant, flicker-free light.
Versions and order numbers
Versions and order numbers
| Order no. | Version |
|---|---|
| 1009 MOD.3 12V | 10-12V |
| 1009 MOD.3 24V | 20-30V |
The 12 V version runs on 10–16 V DC, the 24 V version on 20–30 V DC. Specify version when ordering.
Frequently asked questions
Frequently asked questions
What is the Courtesy Light 1009 MOD.3 used for?
Which light colours are available?
Is there a 12 V and a 24 V version?
Can it be used outdoors?
How much power does it use?
How is it installed?
Can the light source be replaced?
No. The LED is permanently built into the light and cannot be replaced.
Share
